System Log - ABB EQmatic Product Manual

ABB EQmatic
Commissioning

System log

The System log function is used for diagnostics on the system or M-Bus devices connected. All
relevant information about M-Bus or Modbus devices connected is logged with the date/time. It is
logged when an M-Bus or Modbus device is added, configured, disconnected or deleted from the
system.
Further information is recorded via the system log function if changes are made:
IP network settings
Date/time (Manual | Automatic)
Reset to factory settings
Device restart
Firmware update
Meter/device has been assigned to a new node
Node has been deleted/added from/to metering structure
User added/deleted
User logged in/logged out
You can also restrict the system log to a period using the calendar settings and export it as a file
(e.g. xlsx).
72 2CDC512090D0202 | QA/S x.yy.1