ABB EQmatic Product Manual page 53

ABB EQmatic
Commissioning
Cut node
You can cut a node from the structure and paste it at a different place in the structure (or drag and
drop it). The node in the metering structure is disconnected from the M-Bus devices assigned to it.
You can choose whether to transfer with the node all the data collected up to now by the meter
assigned.
Options:
52 2CDC512090D0202 | QA/S x.yy.1
•
Node type: Used to select the node type
Options: Virtual meter
Metering point
•
Virtual meter: If you select this option, a virtual meter node is created
(see also description of Virtual meter).
•
Metering point: If you select this option, a metering point is created
(see also description of Metering point).
•
Name: Used to name the node. Only shown until you select a Metering point.
•
Meter: This parameter links the node to a physical meter. Meters are only displayed for
selection if they have been added to the system via Meter management and correctly
configured. You can only ever assign one meter to a node.
•
Medium: Used to enter and set the medium you want to acquire via the metering point.
•
Consumer group: Used to select and assign a consumer group (see also description of
Consumer group). You can either select a consumer group (provided it has been added
previously) or create a new one.
•
Meter data points: Used to select and assign a data point (consumption/generation) to a
tariff. You can either select a tariff (provided it has been added previously) or create a
new one.
Move node with data
Move node without data
•
Move node with data: Transfers the node to the required position in the structure, with
all the data saved up to now, and pastes it in a new position via the "Paste" window.
•
Move node without data: Transfers the node without any of the data saved up to now.
An image of the original node with the date at the time of moving is created and the
node is shut down. The node and the meter data saved up to now are therefore
available for the analysis of historical data up to the time the node was moved. You
can no longer assign devices to a node that has been moved or shut down.
Caution
After the move there are no longer any data for an analysis or for the display of the node.