Automatic Structure - ABB EQmatic Product Manual

ABB EQmatic
Commissioning
3.2.3.2

Automatic structure

The automatic structure is suitable if only sub-meters are used. If you select this option, a window
for configuring the root node opens. Here, you must enter e.g. the name of the building to which the
meters are assigned.
Detected and configured M-Bus devices are then automatically displayed in a flat (non-nested) list
under the root node.
Note
The root node is a virtual meter. Data points or values that can be physically added together (e.g.
energy in kWh, power in W) are added together in the root node. So the root node can display the
overall consumption and costs for all the sub-meters for a building.
The automatic structure does not take the logical and/or electrical installation of the meters into account.
Use the manual structure if you are using both main and sub-meters.
Click a node to open the Edit node window so you can add to its configuration.
The system is ready for operation and the analysis functions and dashboard can be used.
54 2CDC512090D0202 | QA/S x.yy.1