English
► If the LEDs glow or flash red: Troubleshooting, @ 20.
There is a malfunction in the battery.
7 Assembling the Pruning Shears
7.1
Fitting the Holster and Bag
The holster and bag can be fitted to either the left or right-
hand side of the waist belt. The holster must be fitted at the
side on which the user holds the pruning shears.
2
1
3
► Thread tongue (1) of holster (4) through the loop (3) on
the inside of the waist belt.
► Close the press studs (2).
► Secure the bag (5) to the other side of the waist belt.
12
7.2
7.2.1
► Insert the connecting cable plug (2) in the socket (1).
► Fit the union nut (3) on the socket's thread (1) and tighten
7.2.2
► Unscrew the union nut.
4
5
► Grip the connecting cable plug with your hand.
► Pull the connecting cable plug out of the socket.
8 Adjusting the Pruning Shears
8.1
The blade opening can be adjusted to suit the application.
The following blade openings can be selected:
– 50% (ON)
– 60% (ON)
– 70% (ON)
– No limit (OFF)
► Switch on the pruning shears.
7 Assembling the Pruning Shears
Inserting and Removing Connecting Cable Plug
Inserting the Connecting Cable Plug
it down firmly by hand.
Removing the Connecting Cable Plug
Adjusting Cutting Blade Opening
1
2
3
0458-285-9721-C