Cutting; After Finishing Work; Transporting; Transporting The Pruning Shears And Carrying - Stihl ASA 85 Instruction Manual

14 After Finishing Work

13.4 Cutting

1
2
► Position the anvil blade (2) against the underside of the
branch.
WARNING
The moving cutting blade can seriously injure the user.
► Keep your free hand at least 40 cm away from the cutting
blade.
► Never touch the cutting blade.
► Depress the trigger (3).
The cutting blade (1) closes and the branch is cut.
The cutting blade can jam during cutting work.
0458-285-9721-C
3
NOTICE
The pruning shears can be damaged if they are switched off
while the cutting blade is jammed.
► Do not switch off the pruning shears.
► Do not swing the pruning shears sideways or upwards.
► If the cutting blade is jammed: Swing the pruning shears
downwards and pull them out of the cut.
The cutting blade (1) opens.
14 After Finishing Work
14.1 After Finishing Work
► Switch off the pruning shears, pull out the connecting
cable plug and remove the battery.
► If the pruning shears are wet: Allow the pruning shears to
dry.
► If the battery is wet: Allow the battery to dry.
► Clean the pruning shears.
► Clean the cutting and anvil blades.
► Clean the battery.

15 Transporting

15.1 Transporting the Pruning Shears and Carrying

System

► Switch off the pruning shears and pull out the connecting
cable plug.
► Put the pruning shears in the holster.
English
19