Approved Kombiengines; Assembling The Unit - Stihl SP-KM Instruction Manual

NOTICE
Operating the unit with broken and/or
missing tines (1) may result in damage
to gearbox components or overload
them. Therefore, do not continue using a
unit with broken and/or missing tines.
Operating the unit with broken and/or
missing tines reduces the unit's
harvesting performance.
Always replace damaged tines –
N
see chapter on "Inspection and
Maintenance by User".
SP-KM

Approved KombiEngines

Only use KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the attachment.
This KombiTool may be operated only in
combination with the following
KombiEngines/Motors:
1
STIHL KM 55 R, KM 56 R, KM 85 R
KM 90 R, KM 94 R, KM 100 R,
1)
KM 110 R , KMA 130 R
WARNING
Loop-handled power tools must be
equipped with a barrier bar.
1)
outside the EU only

Assembling the Unit

1)
,
Use the drive tube supplied with the
N
unit.
Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
English
7