Adjusting Pruning Shears For User; Fitting And Removing Harness; Positioning The Connecting Cable; Fitting The Controller's Connecting Cable - Stihl ASA 85 Instruction Manual

English

9 Adjusting Pruning Shears for User

9.1

Fitting and Removing Harness

9.1.1 Fitting and Adjusting the Carrying System
► Put the carrying system on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
► Tighten the straps until the waist belt fits snugly on your
hips and the back padding is against your back.
► Thread the end of the waist belt through the loop (3).
9.1.2 Removing the Carrying System
► Loosen the straps.
► Open the buckles on the chest strap and waist belt.
14
1
2
3
9 Adjusting Pruning Shears for User
► Take the carrying system off your back.
9.2

Positioning the Connecting Cable

The connecting cable can be fitted to the left or right side of
the harness. The connecting cable must be fitted at the side
on which the user holds the pruning shears.
3
2
1
► Thread the connecting cable (1) through one of the
openings (3) in the carrying system.
► Thread the connecting cable (1) through the right-hand
loops (2) or the left-hand loops (4).
► Arrange the connecting cable (1) so that it is as short as
possible without restricting your movement.
9.3

Fitting the Controller's Connecting Cable

1 2
► Take the controller (1) and cable (3) out of the carrying
system through the left or right opening (4).
3
4
3
4
0458-285-9721-C