Identifying Blade Assemblies; Replacing The Anvil Blade - Stihl ASA 85 Instruction Manual

English
► Rotate screw in the middle of the socket counterclockwise
with a flathead screwdriver.
The cutting blade (1) opens.
► Rotate screw in the middle of the socket clockwise with a
flathead screwdriver.
The cutting blade (1) closes.

19.2 Identifying Blade Assemblies

4861/1
There are two different blade assemblies for the pruning
shears:
– Blade assembly 4861/1
– Blade assembly ASA85/B
The individual blades of the two blade assemblies are not
interchangeable.

19.3 Replacing the Anvil Blade

► Switch off the pruning shears and pull out the connecting
cable plug.
24
ASA85B
1
3
2
► Remove the E-clip (3).
► Push out the pivot pin (1).
► If the pivot pin (1) is worn or damaged: Replace the pivot
pin (1).
► If an ASA85/B blade assembly is fitted: Remove the
spacer (2).
► Take out the screw (5) and remove the locking
segment (4).
5
6
► Unscrew the adjusting nut (7).
► Remove the cutting blade (6) together with the grease
nipple (5).
► If the anvil blade (8) is smeared with grease: Clean the
anvil blade (8).
19 Repairing
4
5
7
8
0458-285-9721-C