Agilent Aa Documentation; Conventions; Electrical Connections - Agilent Technologies 240 Series AA User Manual

Introduction

Agilent AA documentation

This manual covers the installation of the Agilent SpectrAA software for 240/280
series AA instruments. Instructions for installing, operating, and maintaining the
instruments and components are included in the SpectrAA Help (see Page 51).
Operating instructions for the Sample Introduction Pump System (SIPS) and other
AA accessories are given in the manuals accompanying the accessories or in the
SpectrAA Help

Conventions

The following conventions have been used throughout this manual:
Single quotes (' ') indicate a selection that you can make from several choices,

such as radio buttons, checkboxes, and software items.
ALL CAPITALS indicates text that you must type in from the keyboard (for

example, type SETUP at the prompt).

Electrical Connections

Rear of instrument:
IEEE 488

Accessory, 9-way female D-range type

Accessory, MCA, 6-way DIN type (AA280FS and AA280Z only)

USB port, optional

UltrAA lamp connections: Burndy circular 6-way, optional (actual number

depends on the model and option selected)
Shock Hazard
WARNING
High voltage
be used at these connections.
Some pins will become energized (300 VDC) when an UltrAA lamp is in a
matching socket. To avoid death or electric shock, NEVER touch any exposed
pins.
Certaines broches du culot des lampes sont sous tension (300 VCC) à la mise
en place d'une UltrAA lampe. Pour éviter l'électrocution ou la mort, ne jamais
toucher les broches sous tension.
34
– To maintain safety, only the UltrAA lamp power supplies should
Agilent 240/280 Series AA (including Zeeman)