Installing the drivers for the Tube-CAM Furnace
Camera option
For instructions on how to install the Tube CAM drivers, see the "Tube-CAM
Furnace Video Option Software Installation Instructions" that came with your
accessory.
Printer setup
The printer must be a make and model supported by Microsoft Windows. To
install your printer, follow the instructions provided with the printer. For more
information, refer to your printer documentation or Microsoft Windows Help.
Troubleshooting
This section contains solutions to some common problems you may encounter
during the installation of the SpectrAA software.
The SpectrAA software is not communicating with the instrument.
Ensure that the computer has been restarted after installing the software and
USB-GPIB converter.
Check the cables and connections.
Check that the instrument and any associated accessories are turned on.
Check that you are not running the Simulator software. (Select Help about
system information.)
Service installation module
The installation test software is accessed directly from the Administration
window. As shown below, this control is only activated when the software has
Agilent 240/280 Series AA (including Zeeman)
Installation
45