Table of Contents
Advertisement
Safety Practices and Hazards
A green light indicates that the instrument is in normal/standby mode.
An orange light indicates that a potential hazard is present.
A blue light indicates that operator intervention is required.
A red light warns of danger or an emergency.
CE compliance
Your Agilent AA instrument has been designed to comply with the requirements of
the Electromagnetic Compatibility (EMC) Directive and the Low Voltage (electrical
safety) Directive (commonly referred to as the LVD) of the European Union. Agilent
has confirmed that each product complies with the relevant Directives by testing a
prototype against the prescribed EN (European Norm) standards.
Proof that a product complies with these directives is indicated by:
The CE Marking appearing on the rear of the product, and
The documentation package that accompanies the product containing a copy
of the Declaration of Conformity. The Declaration of Conformity is the legal
declaration by Agilent that the product complies with the directives listed
above, and shows the EN standards to which the product was tested to
demonstrate compliance.
Electromagnetic compatibility
EN55011/CISPR11
Group 1 ISM equipment: group 1 contains all ISM equipment in which there is
intentionally generated and/or used conductively coupled radio- frequency energy
that is necessary for the internal functioning of the equipment itself.
Class A equipment is equipment suitable for use in all establishments other than
domestic and those directly connected to a low voltage power supply network that
supplies buildings used for domestic purposes.
This device complies with the requirements of CISPR11, Group 1, Class A as
radiation professional equipment. Therefore, there may be potential difficulties in
14
Agilent 240/280 Series AA (including Zeeman)
Advertisement
Table of Contents
Troubleshooting
