Verifying Device Configuration - Emerson Rosemount MultiVariable 3051S Series Quick Start Manual

Quick Start Guide
7

Verifying device configuration

Use Rosemount
master to communicate with and verify configuration of the Rosemount
3051SMV.
Table 7-1
mass and energy flow.
variable output.
Note
Device configuration procedures are given for Rosemount 3051SMV
Engineering Assistant 6.1 or later and AMS Device Manager 9.0 or later in the
Rosemount 3051SMV
A check (✓) indicates the basic configuration parameters. At a minimum,
these parameters should be verified as part of the configuration and startup
procedure.
Table 7-1: Fast Keys for Fully Compensated Mass and Energy Flow
Function
Absolute Pressure Reading and Status
Absolute Pressure Sensor Limits
Absolute Pressure Units
Alarm and Saturation Level Configuration
Alarm and Saturation Levels
Analog Output Trim Options
Burst Mode Setup
Burst Mode Options
Callendar-van Dusen Sensor Matching
Configure Fixed Variables
✓
Damping
Diaphragm Seals Information
✓
Differential Pressure Low Flow Cutoff
Differential Pressure Reading and Status
Differential Pressure Sensor Trim Options
✓
Differential Pressure Zero Trim
Differential Pressure Units
26
™
3051SMV Engineering Assistant or any HART
shows the Field Communicator fast keys for the fully compensated
Table 7-2
Reference
shows the Fast Keys for the direct process
Manual.
October 2018
®
-compliant
Fast Key
sequence
1, 4, 2, 1, 5
1, 4, 1, 5, 8
1, 3, 3, 5
1, 4, 2, 6, 6
1, 4, 2, 6
1, 2, 5, 2
1, 4, 3, 3, 3
1, 4, 3, 3, 4
1, 2, 5, 5, 4
1, 2, 4
1, 3, 7
1, 4, 4, 5
1, 4, 1, 1, 6
1, 4, 2, 1, 4
1, 2, 5, 3
1, 2, 5, 3, 1
1, 3, 3, 4
Rosemount 3051SMV