Emerson Rosemount MultiVariable 3051S Series Quick Start Manual page 19

October 2018
Screen
compo
nent
F
G
H
6.2 Launch Engineering Assistant 6.1 or later
About this task
Flow configuration for the Rosemount 3051SMV is achieved by launching the
Engineering Assistant software from the Start menu.
Procedure
1. Select the Start menu > All Programs > Engineering Assistant.
Engineering Assistant will open to the screen shown in
2. Select Offline button located in the lower right hand corner of the
screen shown in
Figure 6-2: Engineering Assistant Device Connection Screen
Quick Start Guide
Description of use
Any configuration information that needs to be entered or reviewed will
appear in this portion of the screen.
These menus navigate to the Configure Flow, Basic Setup, Device,
Variables, Calibration, and Save/Send Configuration tabs.
These buttons navigate to Config/Setup, Device Diagnostics or Process
Variables sections.
Figure 6-2.
Quick Start Guide
Figure 6-2.
19