Exerpeutic 975XBT Owner's Manual page 17

ASSEMBLY
TOOL
Multi Hex Tool with Phillips
Screwdriver
1PC
STEP 5
5a. Removal of Hardware for Installation: Remove four Phillips Screws (26), four Spring
Washers (29), and four Flat Washers (22) from the underside of the Seat (20).
5b. Installing the Seat to the Main Frame: Align the holes of the Seat (20) to the holes of the Seat
Post (5). Secure the Seat (20) with the previously removed four Phillips Screws (26), four Spring
Washers (29) and four Flat Washers (22). Tighten the Phillips Screws (26) using the Multi Hex
Tool with the Phillips Screwdriver provided.
PRE-INSTALLED HARDWARE
(22) Flat
(29) Spring
(26) Phillips
Washer
Washers
Screw
4PCS
4PCS
4PCS
15