Exerpeutic 975XBT Owner's Manual page 15

ASSEMBLY
Figure C
1 TOOL
6mm Allen Wrench
1PC
STEP 3
3a. Removal of Hardware for Installation: Remove four Hex Bolts (16), four Spring Washers
(12) and four Curved Washers (10) from the Main Frame (1). Slide the Front Post Cover (37)
onto the Front Post (2) before going onto the next sub step.
3b. Connecting the Pulse and Console Wires: Connect the Upper Console Wire (17) from the
Front Post (2) to the Lower Console Wire (25) from the Main Frame (1). Connect the Extension
Hand Pulse Wire A (18) from the Front Post (2) to the Hand Pulse Wire B (28) from the Main
Frame (1). See Figure C.
3c. Installing the Front Post to the Main Frame: Slide the Front Post (2) onto the Main Frame
(1). Align the holes of the Front Post (2) and Main Frame (1). Fasten the Front Post (2) to the
Main Frame (1) with the previously removed four Hex Bolts (16), four Spring Washers (12) and
four Curved Washers (10). Then tighten all the Bolts (16) by using the 6mm Allen Wrench
provided.
13