Menu Structure; Changing Password - Siemens SITRANS MAG 6000 I Operating Instructions Manual

BACKWARD KEY
CHANGE KEY
SELECT KEY
LOCK/UNLOCK
KEY
6.2

Menu structure

The menu is built up of two parts. An operator menu and a setup menu, see also Menu
diagrams (Page 75).
Operator menu
The operator menu is for daily operation. It can be customized in the operator menu setup in
which the menus that are to be available to the operator are selected. The transmitter always
starts up in operator menu No. 1. The forward
through the operator menus.
Setup menu
The setup menu is for commissioning and service only. Access to the setup menu is gained
by pressing the top up key
● View mode
● Setup mode
View mode is a read-only mode. The pre-selected settings can only be scanned.
Setup mode is a read and write mode. The pre-selected settings can be scanned and changed.
Access to the setup mode is password-protected. The factory set password is 1000.
Access to a submenu in the setup menu is gained by pressing the lock key
up key
and return to operator menu no. 1.
6.3

Changing password

The setup menu is password-protected in order to ensure that only authorized personnel can
make any changes in transmitter settings.
Change password as follows:
1. Press top up key
2. Enter password.
3. Use forward key
4. Press lock/unlock key
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
This key is used to step backwards through the menus.
With this key settings or numerical values are changed.
With this key figures to be changed are selected.
This key enables the operator to change settings and it gives
access to submenus.
for 2 seconds. The setup menu operates in two modes:
briefly to return to the previous menu. Press longer (2 sec.) to exit the setup menu
for 2 sec.
or backward key
to unlock password.
and the backward keys
to reach password menu.
Commissioning
6.3 Changing password
are used to step
. Press the top
43