User Setup Backlight Operation - Daikin TSTATD2200C-2 Owner's Manual And Installation Instructions

D_TSTATD2200C-2_Manual_HR.pdf
User Setup:
How to Change Settings in the Setup Screens
To enter Advanced Setup, press the SETUP button, then press MODE. Use the
UP or DOWN buttons to adjust the value of your selection. Press MODE to
advance to the next setup step. Press SETUP again to leave the setup
screens.
Backlight
(Setup Step 3)
The thermostat backlight may be set to be always on, on temporarily with any button
press, on throughout the evening, or always off. (For always off, see Backlight Level)
Press the SETUP button, then press MODE repeatedly until the Backlight setup
step appears. Use the UP or DOWN buttons to make selection. Press MODE to
advance to the next step. Press SETUP to leave the setup screens.
Backlight Off - Backlight turns on with any button press and turns off after 8 seconds.
Backlight On - Backlight is on continuously.
Backlight Level
The backlight can be adjusted between always off and seven levels of brightness.
Press the SETUP button, then press MODE repeatedly until the Backlight setup
step appears. Use the UP or DOWN buttons to adjust the brightness.
Press MODE to advance to the next step. Press SETUP to leave the setup
screens.
Language
(Setup Step 18)
Setup step instructions on the scrolling display can be set for English, Spanish, or French.
Press the SETUP button, then press MODE repeatedly until the Language setup
step appears. Use the UP or DOWN buttons to make selection. Press MODE to
advance to the next step. Press SETUP to leave the setup screens.
23 8/29/13
Backlight Operation
(Setup Step 4)
PAGE 15
1:11 PM