RDZ CHR 120-FC/S Technical Installation Manual page 23

Air handling units. mechanical ventilation with heat recovery appliance
Table of Contents

Advertisement

Units in standard con guration include:
• Temperature probe inside the display for temperature control;
• Return air temperature probe for temperature control be enabled
as an alternative to the display probe;
• External air temperature probe for free-cooling/heating
management;
• Expulsion air temperature probe for defrost management;
• By-pass damper actuator.
Key to the display
1.
Main eld
2.
Set point
3.
Secondary eld
4.
Clock program On
5.
Current time band
6.
Day of the week
7.
Fans On
8.
Reheating mode On
9.
Free-cooling mode On
10. Defrost mode On
11. Antifreeze protection mode On
12. General alarm condition (buzzer on)
13. Max fan speed demand active
14. Actual fan speed status
mode
Key to enter/exit setting
Key to enter setting of fan speed adjusting
Date/time setting and time band setting
Unit switch on/o
Central knob
Turn the knob to set the value and press to
Manopola centrale
con rm
Le unità sono dotate di serie di:
• sonda di temperatura nel display remotabile per la
termoregolazione;
• sonda di temperatura della ripresa aria per la termoregolazione
abilitabile da parametro in alternativa a quella del display;
• sonda di temperatura aria esterna per la gestione del free-
cooling/heating;
• sonda di temperatura aria di espulsione per la gestione
sbrinamento;
• servocomando serranda by-pass.
Legenda display
1.
Campo principale
2.
Set point
3.
Campo secondario
4.
Cronotermostato attivo
5.
Fascia oraria corrente
6.
Giorno della settimana
7.
Ventilazione attiva
8.
Modalità riscaldamento attiva
9.
Modalità free-cooling attiva
10. Modalità sbrinamento attiva
11. Modalità antigelo attiva
12. Stato di allarme generico
13. Massima ventilazione attiva
14. Stato velocità ventilatori
Keypad / Tastiera
Tasto per ingresso/uscita programmazione
Tasto per accedere alla regolazione della velocità dei
ventilatori
Impostazione data e ora ed abilitazione fasce orarie
Accensione/spegnimento della macchina
Ruotare la manopola per impostare il valore e premere
per confermare
23
)
(cicalino di segnalazione attivo

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chr 240-fc/s

Table of Contents