Figure C-1. Mounting Bracket Template; Figure C-2. Modem Connector Pinout - Sierra Wireless DART 200 CDPD Modem User Manual

Appendix
C

Figure C-1. Mounting bracket template

+
1.8
"
+

Figure C-2. Modem connector pinout

5 4 3
9 8
PN1197-00 Revision 1.0
Charts and Diagrams
Figure C-1 shows the hole pattern for the mounting bracket. Use a 4-40
machine screw, a 4-25 tapping screw, or a 0.125 DIA rivet to fasten the
bracket. A flat washer is not required because the bracket is made of
hardened steel, but a lock washer is required.
4"
.14"
Figure C-2 shows the modem connector pinout configuration. A straight
cable is required between the DTE (computer or terminal) and the DCE
(modem).
2 1
DB-9S
(on the unit)
7 6
+
+
1 - Carrier Detect (CD)
2 - Received Data (RXD)
3 - Transmitted Data (TXD)
4 - Data Terminal Ready (DTR)
5 - Signal Ground (GND)
6 - Data Set Ready (DSR)
7 - Request To Send (RTS)
8 - Clear To Send (CTS)
9 - N/C