DART 200 CDPD Modem User's Guide
Sierra Wireless, Inc.
From a networking perspective, the modem has complete built-in
Transmission Control Protocol (TCP), User Datagram Protocol (UDP),
Serial Line Internet Protocol (SLIP), and telnet protocols. Network
communications can be achieved without the attached end-user device
having to provide an integrated TCP or UDP capability. Select the
desired built-in protocol included in the DART 200 by using the
appropriate AT dial command and begin your data transfer. The end-user
can put the DART 200 in SLIP mode, providing an external software
stack, if desired.
A power cord with connector is supplied with each DART 200, and one
copy of this User's Guide is included with each order. A power supply
and cellular antennas are available as options at additional cost.
New for this version
If you have prior experience with the DART 200, major differences and
enhancements between the old modem software (3.0.9 dated 7/2/96 and
earlier) and the current version are:
Provides the "friends only" feature for TCP in addition to UDP
The automatic SLIP restart feature is now available
DART 200 accessories and services
RF accessories
Power accessories
Hardware options
Software options
Services
Migration considerations
If you are migrating applications from prior versions of the DART 200
software to the current version, there are no changes in this version that
alter existing application operation to be aware of. However, to use TCP
Friends Only mode or Auto SLIP restart, some alteration can be required.
3 dB cellular magnetic mount antenna
110 VAC to 12 VDC @2.5 amps power
supply
Mounting bracket
V.42 bis data compression
Developers package
DART technical training
1 Introduction
1-2