Introduction; Vehicle Function Compatibilities - Directed DS4+ Installation Manual

Introduction

DS4+ is a complete solution for remote start, security (when security features are enabled), bypass, and features
built in Bluetooth 4.0 allowing you to configure and control your system. This guide provides information
on the installation of the module as an analog unit, however a digital solution could be available for your
vehicle. Please refer to the DirectLink application or www.directechs.com for more information about which
configuration is best for your application.
Warning! This module is designed to be configured using the DirectLink application for mobile devices, however it can also
be configured using the web tool located at www.directechs.com. To download the DirectLink mobile application, please visit the
Google Play or Apple store.

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
Arm Factory Security
Disarm Factory Security
Door Lock Control
Door Unlock
Trunk / Hatch Release
DS4+ Only
Ford Key2Go (40-bit keys only)
Key2GO
Immobilizer Bypass-Data No Key Req'd
Accessory Activation
Ignition Activation
RAP Shut Down (Retained ACC Power)
4
933.FORD6 3.20.193 2010 Mercury Mariner
© 2019-01-18 Directed. All rights reserved.
Remote Start Takeover
SmartStart
Start (Crank) Activation
Entry Monitoring ALL Door Pins
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Factory Alarm Trigger Monitoring
Brake Status (foot brake)
Door Locks Status
E-Brake Status
Ignition Status