Q5X Laser Triangulation Sensor with Background Suppression
3.4.2 Reset to Factory Defaults Using the Remote Input
Eight-pulse the remote input to apply the factory defaults and return to Run mode.
T
T
T
T
T
T
T
T
T
Note: The input wire function remains at remote teach input (
3.5 Locking and Unlocking the Sensor Buttons
Use the lock and unlock feature to prevent unauthorized or accidental programming changes. Three settings are available:
•
—The sensor is unlocked and all settings can be modified (default).
•
— The sensor is locked and no changes can be made.
•
—The switch point value can be changed by teaching or manual adjustment, but no sensor settings can be
changed through the menu.
Note: When the sensor is in either
(CH1/CH2).
When in
mode,
(CH1/CH2) or (-)(MODE) are pressed, but
When in
mode,
press and release (+)(CH1/CH2) or (-)(MODE). To enter TEACH mode, press the (SELECT)(TEACH) button and hold for
longer than 2 seconds.
Button Instructions
To enter
mode, hold
Holding
and pressing
Remote Input Instructions
1. Access the remote input.
Action
Four-pulse the remote input.
2. Lock or unlock the sensor buttons.
Action
Single-pulse the remote input to unlock the sensor.
Double-pulse the remote input to lock the sensor.
Triple-pulse the remote input to apply the operator
lock to the sensor
20
T
T
T
T
T
T
or
displays when the (SELECT)(TEACH) button is pressed. The switch point displays when (+)
displays if the buttons are pressed and held.
displays when (-)(MODE) is pressed and held. To access the manual adjust options, briefly
and press
four times. To enter
four times unlocks the sensor from either lock mode and the sensor displays
www.bannerengineering.com - Tel: +1.763.544.3164
).
mode, the active channel can be changed using (+)
mode, hold
Result
T
T
T
T
The sensor is ready to have the button state
T
T
T
defined and
Result
T
Run mode.
T
T
Run mode.
T
T
T
T
T
T
Run mode
and press
seven times.
.
displays.
displays and the sensor returns to
displays and the sensor returns to
displays and the sensor returns to