Banner Q5XKLAF2000-Q8 Instruction Manual page 23

Note: To program the sensor using remote input, remote input must be enabled (
1. Present the target.
Method Action
Push Button
Present the first target. The sensor-to-target distance must be within the
sensor's range.
Remote Input
2. Start the TEACH mode.
Method Action
Push Button Press and hold TEACH for longer than 2 seconds.
Remote Input No action required.
3. Teach the sensor.
Method Action
Push Button Press TEACH to teach the target.
Remote Input Single-pulse the remote input.
4. Present the targets.
Method Action
Push Button
Present additional targets. The sensor-to-target distance must be within the
sensor's range.
Remote Input
5. Teach the sensor.
Method Action
Push Button Press TEACH to stop teaching the sensor.
Remote Input Single-pulse the remote input.
Table 3: Expected TEACH Behavior for Dynamic Background Suppression
Figure 24
See on page 33 for the minimum object separation.
Condition
Two valid distances that are greater than or
equal to the horizontal minimum object
separation
Two valid distances that are less than the
horizontal minimum object separation
One valid distance with one invalid TEACH
point
Two invalid TEACH points
TEACH Result
Sets a switch point between the two taught distances.
Sets a switch point in front of the furthest taught distance
by the horizontal minimum object separation.
Sets a switch point between the one taught distance and
the maximum range.
Sets a switch point for the currently selected channel at
200 cm.
www.bannerengineering.com - Tel: +1.763.544.3164
Q5X Laser Triangulation Sensor with Background Suppression
Result
The target's measurement value displays.
Result
the display. The DYN indicator flashes.
N/A
Result
The sensor begins sampling target
distance information and
T
The DYN indicator flashes.
Result
The sensor continues to sample target
distance information and
The DYN indicator flashes.
Result
The new switch point flashes rapidly and
T
the sensor returns to Run mode.
Display
The switch point distance flashes on the
display.
alternately on the display.
alternately on the display.
alternately on the display.
= ).
and flash alternately on
and
flash alternately on the display.
and
flash alternately on the display.
and the switch point distance flash
and the switch point distance flash
and the switch point distance flash
23