System Board - HP EliteBook x360 1040 G5 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes a processor and replacement thermal material.
Description
Equipped with an Intel Core i7-8750H 2.20-GHz (turbo up to 4.10-GHz) six core processor (2666-MHz, 9.0
MB L3 cache, 45-W), the Intel HM370 chipset, an Nvidia GeForce GTX1050Ti graphics controller with 4096-
MB discrete memory, 16-GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i7-8750H 2.20-GHz (turbo up to 4.10-GHz) six core processor (2666-MHz, 9.0
MB L3 cache, 45-W), the Intel HM370 chipset, an Nvidia GeForce GTX1050Ti graphics controller with 4096-
MB discrete memory, 16-GB of system memory, and a non-Windows operating system
Equipped with an Intel Core i7-8750H 2.20-GHz (turbo up to 4.10-GHz) six core processor (2666-MHz, 9.0
MB L3 cache, 45-W), the Intel HM370 chipset, an Nvidia GeForce GTX1050Ti graphics controller with 4096-
MB discrete memory, 8-GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i7-8750H 2.20-GHz (turbo up to 4.10-GHz) six core processor (2666-MHz, 9.0
MB L3 cache, 45-W), the Intel HM370 chipset, an Nvidia GeForce GTX1050Ti graphics controller with 4096-
MB discrete memory, 8-GB of system memory, and a non-Windows operating system
Equipped with an Intel Core i7-8565U 1.80-GHz (turbo up to 4.60-GHz) quad-core processor (2400-MHz,
8.0 MB L3 cache, 15-W), an Intel integrated SoC chipset, an Nvidia GeForce MX150 graphics controller with
2048-MB discrete memory, 8-GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i7-8565U 1.80-GHz (turbo up to 4.60-GHz) quad-core processor (2400-MHz,
8.0 MB L3 cache, 15-W), an Intel integrated SoC chipset, an Nvidia GeForce MX150 graphics controller with
2048-MB discrete memory, 8-GB of system memory, and a non-Windows operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
When replacing the system board, be sure to remove the solid-state drive (see
and the fan/heat sink assembly (see
and install them on the replacement system board.
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Webcam cable
(2) WLAN antenna cables
NOTE:
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
NOTE:
sink assembly.
(4) WWAN antenna cables
Bottom cover on page
Battery on page
Fan/heat sink assembly on page
The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
Release the WLAN antenna cables from the retention clips (3) built into the fan/heat
27).
28).
44) from the defective system board
Spare part number
L38130-601
L38130-001
L38129-601
L38129-001
L38128-601
L38128-001
Solid-state drive on page
Component replacement procedures
30)
41