Wwan Module - HP EliteBook x360 1040 G5 Maintenance And Service Manual

WWAN module

Description
HP IT4210 LTE/HSPA+ M.2 WWAN module with GPS
Huawei ME9065 LTE M.2 WWAN module with GPS
Intel XMM 7360 LTE Advanced M.2 WWAN module with GPS
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the WWAN module:
1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE:
WWAN antenna cable labeled "6/AUX" connects to the WWAN module "Aux" terminal.
2. Remove the Phillips M2.0×2.4 screw (2) that secures the WWAN module to the system board. (The WWAN
module tilts up.)
Bottom cover on page
The WWAN antenna cable labeled "5/MAIN" connects to the WWAN module "Main" terminal. The
27).
Battery on page 28).
Component replacement procedures
Spare part number
L15398-006
L29293-005
L27188-005
31