Table of Contents
Advertisement
2.3
Breaking Bluetooth
Holding down the magic key for approx. 2 seconds or scanning the "Break Bluetooth
forcibly breaks the scanner's Bluetooth
in Section 3.1.)
Note: Breaking the Bluetooth
operation" QR Code symbol.
Note: In the data verification mode, the magic key is used to enter a master code, not used to break the Bluetooth
wireless link. To break the link, use the scanner to read the "Break Bluetooth
Section 13.2 using the procedure in Section 13.1.
Note that when the scanner, as a master, is searching for a connection target or it is, as a slave, waiting for a master to
connect, the magic key can break the Bluetooth
2.4
Reestablishing Bluetooth
When the scanner's Bluetooth
switch reestablishes the Bluetooth
master; the scanner as a master connects to a target slave.
- Scanning the "Break Bluetooth
- Pressing the magic key to break the Bluetooth
- Modifying the scanner configuration with the configuration software (ScannerSetting_2D)
- "Reconnect request" dialog displayed by the configuration software (ScannerSetting_2D)
- Replacing the battery cartridge
Wireless Links
wireless link. (The QR Code symbol is given in Section 3.2 and its procedure
wireless link does not disable the Bluetooth
wireless link.
Wireless Links
wireless link has been broken by any of the following events, pressing the trigger
wireless link. The scanner as a slave waits for a connection request from the
wireless link" QR Code symbol (See Sections 13.1 and 13.2.)
wireless link
interface. To disable it, scan the "End
wireless link" QR Code symbol given in
5
wireless link" QR Code symbol
Advertisement
Table of Contents
