Chapter 10 Charging And Replacing The Battery Cartridge; Charging And Discharging The Battery Cartridge - Denso GT10Q-SB User Manual

Chapter 10 Charging and Replacing the Battery Cartridge

10.1 Charging and Discharging the Battery Cartridge

The scanner sounds a warning when the charge is low. Immediately recharge the battery cartridge.
Some heat generation in the scanner or charger during charging is perfectly normal.
Charger
Charge LED (Orange)
 Important notes on care and handling
 Use the charger only in locations satisfying the following conditions.
- Ambient temperature of 10 to 40C
- Humidity of 20% to 80%
- No dust or excessive vibration
- No splashing of water or other liquids
 Do not leave the charger in direct sunlight, in an automobile, or other location exposed to high temperatures.
 Keep the charger away from telephones, television sets, radios, and other equipment sensitive to electromagnetic
noise.
 Disconnect the charger from the electrical outlet when not in use.
 Occasionally clean the charging pins with a dry cotton swab or similar material. Allowing foreign matter to
accumulate can interfere with proper charging.
 Do not subject the charger to rapid temperature changes. The charger may not work normally.
Power supply LED (Green)
48
Scanner
Indicator LED
AC adapter