Denso GT10Q-SB User Manual page 9

 Never bring any metals into contact with the terminals in connectors.
Doing so could produce a large current through the scanner, resulting in heat or fire, as well as
damage to the scanner.
 Use the dedicated battery cartridge only.
Failure to do so could result in fire.
 Stop charging if it cannot be completed within the specified time.
 Never put the battery cartridge into a microwave oven or high-pressure container.
 The scanner uses a laser light for indicating
the scan range. The intensity of laser light
might be too low to inflict bodily injury.
However, do not look into the laser beam.
The scanner complies with IEC
60825-1:1993+A2:2001 and 21 CFR
1040.10, 1040.11 except for deviations
pursuant to Laser notice No. 50, dated July
26,2001.
In accordance with Clause 5, IEC 60825-1,
the following information is provided to the
user:
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Handling the scanner and AC adapter
 Do not put the scanner or AC adapter on an unstable or inclined plane.
It may drop, creating injuries.
 Never put the scanner or AC adapter in places where there are excessively high temperatures,
such as inside closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
 Avoid using the scanner or AC adapter in extremely humid areas, or where there are drastic
temperature changes.
Moisture will get into the scanner or AC adapter, resulting in malfunction, fire or electrical shock.
 Do not place the scanner or AC adapter anyplace where it may be subjected to oily smoke or
steam, e.g., near a cooking range or humidifier.
Doing so could result in a fire or electrical shock.
 Never disassemble or modify the scanner or AC adapter; doing so could result in an accident
such as break or fire.
Doing so could result in a fire or electrical shock.
iv
Never
disassemble