Denso GT10Q-SB User Manual page 77

Items
AI-delimited mode
- Availability of AI #3
AI-delimited mode
- AI #1
AI-delimited mode
- AI #2
AI-delimited mode
- AI #3
Delimiters in AI-delimited mode
Transmission of ERROR command at the
time of scanning failure
(Note 2) For details about AI candidates, refer to Chapter 7, Section 7.2.1.3, "(3) AI table."
(9) Switching to sleep mode for power saving and auto power-off
Items
Switching to sleep mode for power saving
Auto power-off
Parameters
Enable
Disable
Selectable from AI candidates
(Note 2)
Selectable from AI candidates
(Note 2)
Selectable from AI candidates
(Note 2)
Header/Terminator
Comma
Tab
Enable
Disable
Parameters
After 30 seconds
(Ordinary current mode)
Immediately
(Power saving mode)
5 to 640 minutes
Disable
: Changeable only with the configuration software.
64
Defaults Refer to:

00
00
00
Section 7.2


Defaults Refer to:
Section 3.2

60 min.
Section 3.2