Table of Contents
Advertisement
7.1.4 Output of the master data entered
Scanning the "Output master data" QR Code symbol given below lets the scanner output the verification section of
master data entered in the verification setup procedure, together with the code ID mark.
7.1.5 Breaking the Bluetooth
To break the Bluetooth
Break Bluetooth
End
"Output master data" QR Code
wireless link with no master data stored
wireless link with no master data stored, follow the procedure given below.
wireless link
Hold down the magic key for at least 2 seconds to turn the indicator
LED green. With the magic key held down, press the trigger switch to
scan the "Break Bluetooth
Section 13.2 with the procedure in Section 13.1.
Wait for the scanner to beep three times and the indicator LED to turn
blue, indicating successful disconnection.
18
wireless link" QR Code symbol given in
Advertisement
Table of Contents
