Datavideo GO KMU-100 STUDIO Instruction Manual page 11

7. Please connect Cable No. 12 (RS-422 to RJ-45 adapter cable) from the RS-422 interface on the rear
panel of the KMU-100 to the RJ-45 interface on the rear panel of the RMC-185.
12
8. First locate the DC jack on the RMK-6 and on the inner side of the DC jack, you should find five
DC plug cables attached. Connect Cable No. 1 / 2 / 3 / 4/5 (DC Plug Cable) to the RMC-185, TLM-
102, KMU-100, NVS-25 and AD-100M DC jacks respectively and secure by tightening the outer
fastening ring.
2
3
4
5
1
11