Gas Connection; Electrical Connection - AEG 47009GO-MN User Manual

Hide thumbs Also See for 47009GO-MN:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com

Gas connection

Make sure that airflow around the
appliance is good. A defective air
supply can cause lack of oxygen.
Information about the gas supply is on
the rating plate.
This appliance is not connected to a
combustion products evacuation
device. It must be installed and con-
nected in accordance with current
installation regulations.
Particular attention must be given
to the relevant requirements regarding
ventilation.
The use of a gas cooking appliance
cause heat and moisture in the room
in which it is installed. Make sure that
ventilation in the kitchen is good: keep
natural ventilation holes open or install
a mechanical ventilation device
(mechanical extractor hood).
More ventilation (for example opening
of a window or increasing the level of
mechanical ventilation where present)
is necessary when you operate the
appliance intensively for a long time .

Electrical connection

Only an approved electrician can install
and connect the appliance. Contact
an approved service centre. This is to
prevent the risks of structural damage
or physical injury.
The appliance must be earthed.
Make sure that the electrical data on
the rating plate agree with your
domestic power supply.
Information on the voltage is on the
rating plate.
You must have the correct isolation
devices: line protecting cut-outs, fuses
(screw type fuses removed from the
holder), earth leakage trips and
contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
ENGLISH
mains at all poles. The isolation device
must have a contact opening with of
minimum 3 mm.
The shock protection parts must be
fixed in such a way that they cannot
be undone without tools.
Always use a correctly installed
shockproof socket.
When you connect electrical applian-
ces to mains sockets, do not let cables
touch or come near the hot appliance
door.
Do not use multi-way plugs, connectors
and extension cables. There is a risk
of fire.
Make sure not to squash or cause
damage to the mains plug (if applica-
ble) and cable behind the appliance.
Make sure that the mains connection
is accessible after the installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug (if applicable).
Do not replace or change the mains
cable. Contact the service centre.
Use
Only use the appliance for domestic
cooking tasks. Do not use the applian-
ce for commercial and industrial use.
This is to prevent physical injury to
persons or prevent damage to property.
Always monitor the appliance during
operation.
Always stay away from the appliance
when you open the door while the
appliance is in operation. Hot steam
can release. There is a risk of burns.
Do not use this appliance if it is in
contact with water. Do not operate the
appliance with wet hands.
Do not use the appliance as a work
surface or storage surface.
The cooking surface of the appliance
becomes hot during use. There is a
risk of burns. Do not put metallic
objects, for example cutlery or
saucepans lids, on the surface, as they
5

Advertisement

Table of Contents
loading

Table of Contents