Electrical Connections - AEG 47009GO-MN User Manual

Hide thumbs Also See for 47009GO-MN:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
FIG. 17
Z
FIG. 18
Table D gas burner
Burner
Rapid
burner
Semirapid
1,75
burner
Auxiliary
burner
Triple crown
burner

Electrical connections

This appliance must be installed
by a qualified person in
accordance with the latest edition
of the IEE Regulations and in
compliance with the manufactu-
rer instructions. Ensure that the
voltage is the same as that stated
on the rating plate.
Warning !
This appliance must be earthed
If an fixed appliance is not equipped with
supply cable and plug, the power supply
For butane/propane gas, the adjusting
screw must be tight screwed.
Make sure that the flame does not go
out passing quickly from the max. flow
to the minimum flow
Assemble the knob again.
Power kW
Natural Gas
G20 (2H) - 20 mbar
kW
kW
ini. 1/100
mm
3,0
0,75
115
0,48
97
1,0
0,33
72
3,3
1,30
130
must be fitted with a disconnect switch
in which the distance between contacts
permits total disconnection in accordance
with overvoltage category III, as required
by installation regulations.
Be sure that the earth wire green/yellow
is not interrupted by the switch
We recommend that the cooker circuit is
rated to 13 amps.
Cable type HO5 RRF or HO5 RRF,
3 X 1.5 mm
Connecting the mains cable
Open the mains terminal block cover as
shown, unscrew screw “A” the cable
ENGLISH
.
LPG (Butane/Propane)
G30/G31 - 28-30/37
m³/h
ini. 1/100
g/h
mm
0,286
85
55
0,167
65
35
0,095
50
24
0,343
96
95
.
2
25

Advertisement

Table of Contents
loading

Table of Contents