Gas Connections - AEG 47009GO-MN User Manual

Hide thumbs Also See for 47009GO-MN:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com

Gas connections

The gas and electricity connec­
tions and any adjustments must
be made by specialised staff.
Warning !
This appliance shall be installed
in accordance whit the
regulations in force and only in
a well-ventilated space.
Read the instructions before
installing or using this appliance.
We recommend to check wether
the appliance has been foreseen
for the kind of gas distributed.
Conversion for use other gases
must only be undertaken by a
qualified person. For information
for use on other gases contact
your local Service Centre. The
cooker must be installed by a
qualified person, conforming to
local regulations. Failure to install
the appliance correctly could
invalidate any manufacturers
warranty and lead to prosecution
under the above quoted
regulations.
Provision for Ventilation
The room containing the cooker should
have an air supply in accordance with
local regulations.
Remember that the quantity of air
necessary for combustion must never
be less than 2m3/h for each kW of power
FIG. 15
(see total power in kW on the appliance
data plate).
Gas Safety (Installation & Use)
Regulations
It is the law that all gas appliances are
installed by competent persons in
accordance with the current edition of
the Installation & Use Regulations.
It is in your interest and that of safety
to ensure compliance with the law.
For UK:
This appliance must be installed by a
qualified electrician / competent person
gas safe register. Safety may be
impaired if installation is not carried
out in accordance with these
instructions.
The appliance must be installed in
accordance with All relevant British
Standards (latest editions).
Gas Connection
Prior to installation, ensure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment
conditions are compatible.
The adjustment conditions for this
appliance are stated on the rating plate
which can be found on the back cover.
This appliance is not designed to be
connected to a combustion products
evacuation device. Particular attention
should be given to the relevant
requirements regarding ventilation.
Connection to the cooker should be
made with connection in accordance with
local regulations.
A
Warning !
connect the gas to the oven's
gas supply line using the supplied
connector (A) see FIG. 15.
ENGLISH
23

Advertisement

Table of Contents
loading

Table of Contents