Battery Replacement; Maintenance & Cleaning - Elma Instruments CM01A User Manual

5.Battery Replacement

When the low battery symbol is displayed on the LCD or LCD display is
dark, replace the old batteries with two new batteries.
5.1. Turn the power off and remove the test leads from the clamp
meter.
5.2. Remove the screw of the battery compartment.
5.3. Lift and remove the battery compartment.
5.4. Remove the old batteries.
5.5. Insert two new 1.5V SUM-3 batteries.
5.6.. Replace the battery compartment and secure the screw.
6.Maintenance & Cleaning
Servicing not covered in this manual should only be performed by
qualified personnel. Repairs should only be performed by qualified
personnel.
Periodically wipe the case with a damp cloth and detergent; do not use
abrasives or solvents.
39
Elma CM-01A