Elma Instruments CM01A User Manual page 29

Once the max/min button is pressed, either MAX or MIN shall be
displayed on LCD
14. Continuity Symbol
If ohm and continuity function is selected, this symbol shall appear on
LCD.
15. Units Symbols
Once a function is selected, corresponding unit (V, Ω , A, or Hz) shall be
displayed on LCD.
16.V,Ω, Hz input Terminal
This terminal is used as input for voltage, ohm/continuity, or frequency
measurements.
17.COM Terminal
This terminal is used as common reference input.
18. Hand Strap
Put your hand through the hole of hand strap to avoid accidental drop of
the clamp meter.
29
Elma CM-01A