Table of Contents
Advertisement
18.7.99
Operation at more than one base station
Procedure for operating at more than one base station
Selecting the best station
KAP17.FM5
Operation at more than one base station
You can register and operate your handset at up to 6 Gi-
gaset Tango base stations.
A Gigaset Tango handset can only be registered
at Gigaset Tango base stations.
This offers the following advantages:
You can operate the same handset at base stations in
different locations (e.g. in the office and at home).
You can extend the range or the area in which you can
call with the same handset in large areas.
Please note the following when operating at
more than one base station:
We recommend following the procedure below:
1.
Register your handset at the required base stations
(
page 48) and assign the required base station
numbers (1 to 6).
2. Register your handset at all base stations with the
same internal call number, provided this is not yet as-
signed.
Normally, radio contact is automatically reestablished if
you move your handset from one base station radio area
to another. You can select the best station, to which your
handset can set up the best radio connection.
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Ongoing calls are interrupted or cleared
down when you move from one base sta-
tion radio range to another.
Internal calls can only be made within the ra-
dio range of a base station, i.e. not to hand-
sets that are in another base station radio
range.
If you are out of range of a base station for
several minutes, and your handset is
switched on, when you reenter the range it
may take up to 20 minutes to "find" the base
station again. In such cases, switch the mo-
bile unit off for a brief time and then on
again (
page 6).
55
Advertisement
Table of Contents
