Table of Contents
Advertisement
18.7.99
Base station settings
Base station settings
Service function
. t Service
Switching the base station ringer off and setting the ringer volume
. t Service
26
KAP09.FM5
You can program your Gigaset 2011 Tango to suit your own
individual requirements. The settings are made from a
registered handset.
Base station settings are introduced using the "Service"
menu function.
t means: browse using x
(
It is possible to define whether the ringers should be sig-
naled on the base station or only on the handset. You can
set the ringer volume for the ringer on the base station.
There are seven volume levels available:
Level 0
Level 1 ... Level 6 =
The factory default is level 6 (loud).
It is also possible to set the ringer volume on the
handset (
t means: browse using x
(
Call up "Service" menu item.
# : %
Start setting procedure. The ringer setting is sounded.
The set volume is indicated on the display:
:
*5 6
SET
x
Press the digit for the desired volume (1 to 6) or 0 to
o
SET
switch the ringer off and store setting.
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
confirm using u
Z
,
=
Switch off base station ringer.
Calls will only be signaled on the
handset.
Ringer volume low ... loud
page 29).
confirm using u
Z
,
(Example: ringer volume 6
is set)
SET
RUF AUS
REDIAL
)
OK
)
OK
Advertisement
Table of Contents
