Analog Trunks - Siemens pocket 2011 Tango Operating Instructions Manual

18.7.99
Setting the flash time in dual-tone multifrequency signaling (DTMF)
. t Service
9 3 0x
u
REDIAL
9 3 6x
u
REDIAL
9 3 3x
u
REDIAL
9 3 4x
u
REDIAL

Analog trunks

Deleting the analog trunk/MSI
. t Service
2 % 3 x
u
REDIAL
KAP16.FM5
t means: browse using x
(
Call up the "Service" menu item.
#1
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 58).
Set a flash time of 80 ms.
SET
or
Set a flash time of 100 ms (factory default).
SET
or
Set a flash time of 300 ms.
SET
or
Set a flash time of 600 ms.
SET
For through connection to the public telephone network
you must set:
the analog trunk
the pause length after the analog trunk (if a pause is
necessary after entry of the analog trunk)
If the telephone system is connected as a subsystem to
a main system, you must set the:
the analog trunk
the MSI
the pause length after the analog trunk/MSI
For the pause length to be entered after the an-
alog trunk/MSI, please consult the documenta-
tion about your telephone system.
t means: browse using x
(
Call up the "Service" menu item.
#1
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 58).
Delete analog trunk/MSI
SET
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Operating in a telephone system
confirm using u
Z
,
confirm using u
Z
,
)
OK
)
OK
53