Table of Contents
Advertisement
18.7.99
External outgoing calls
External outgoing calls
Calling external subscribers
Dialing with call number checking (en-bloc dialing)
u
t Dial
W
10
KAP06.FM5
c
Press the off-hook key. You will hear the dial tone.
Enter the desired call number on the dialling keypad. The
o
number you have entered is shown on the display, e.g.:
:
Extern
123456
INT
RUF AUS
You will hear the ring tone.
En-bloc dialing allows you to check the external call
number entered before it is dialed and correct it, if neces-
sary, using the
(For instructions on how to edit the call number, "Input
function"
The maximum length of call numbers that you
can enter is 22 digits.
Enter the desired call number. The number you have en-
o
tered is shown on the display, e.g.:
:
123456
< > X
WEITER
You can correct the number entered using the enter func-
tion.
c
Press the off-hook key within 30 seconds to seize the
line. The call number is dialed. You will then hear the ring
tone.
or
t means: browse using x
(
The call number is dialed.
You can also leave this additional menu without dialing by
pressing the
Gigaset 2011 Tango: A30852-X1100-B301-2-7619
PAUSE
X
display key before the line is seized.
page 22).
_
W
confirm using u
Z
,
{
display key.
)
OK
Advertisement
Table of Contents
