①
②
③
Figure 4-6
NOTICE
Bearing damage
The bearing insulation must not be bridged. Bearing currents can damage bearings.
● Also when performing subsequent installation work, e.g. installing an automatic lubrication
● Contact your Service Center, if necessary.
See also
Service and Support (Page 131)
SIMOTICS M-1PH8 1PH818., 1PH822.
Operating Instructions 07/2016
Driven machine
Motor
Coupling
Schematic representation of a single drive
system or a non-insulated vibration sensor, ensure the bearing insulation is not bridged.
4.14 Converter operation
④
Insulated bearings
⑤
Insulated tachometer fitting
Preparations for use
47