Siemens 1PH818 Operating Instructions & Installation Instructions page 147

Service Instructions NFF
Electromagnetic Double Face Spring – Applied Brake
3.4 In - process stocking
All parts are made of stainless material or are provided with a surface protection by gas
nitrocarburizing. In addition they are prined with a zinc phosphate painting.
Bore and keyway of the driving hub (15) are supplied greased.
Should it be intended to stock the brake in - process, another protection against corrosion has
to be provided. Please consult our after - sales service (address given in chapter 10.3).
3.5 Delivery extent
On receipt check the consignment for completeness (see packing list).
Possible damage during transportation and/or missing parts must be advised immediately and
in writing.
Stromag Dessau
IP 66
6
safety in motion
01.06.2009
147