Switching On - Siemens 1PH818 Operating Instructions Manual

7.4

Switching on

● Before you switch on the motor, ensure that the parameters of the frequency converter
● Use appropriate commissioning tools, such as "Drive ES" or "STARTER".
A5E02605207A AA
Siemens AG Operating Instructions V1.0 1PH8
have been assigned correctly.
CAUTION
Operation noise or abnormal noises
The motor can be damaged by improper handling during transport, storage or set up. If
a damaged motor is operated damage to the winding, bearings or, complete destruction
of the motor can be the result.
If the motor is not running smoothly or is emitting abnormal noises, de-energize it, and
determine the cause of the fault as the motor runs down.
NOTICE
Pay attention to the maximum rotational speed
The maximum rotational speed n
The maximum rotational speed is specified on the rating plate.
is the highest permissible operating speed.
max
Commissioning
7.4 Switching on
49