Siemens 1PH818 Operating Instructions Manual page 9

Figure 9-3 Detailed view of the speed encoder.............................................................................................65
Figure 9-4 Electrical connection of the speed sensor ...................................................................................67
Figure 10-1 Motor, complete ...........................................................................................................................71
Figure 10-2 Rolling-contact bearing bush drive end with mounted gearing, with regreasing .........................72
Figure 10-3 Rolling-contact bearing bush drive end with belt coupling, with regreasing ................................73
Figure 10-4 Rolling-contact bearing bush drive end, with coupling output, with regreasing...........................74
Figure 10-5 Rolling-contact bearing bush drive end, with coupling output, with permanent lubrication .........75
Figure 10-6 Rolling-contact bearing bush non-drive end, permanent lubrication ...........................................76
Figure 10-7 Rolling-contact bearing bush non-drive end, with regreasing, shaft height 180 / 225.................77
Figure 10-8 Rolling-contact bearing bush non-drive end, with regreasing, shaft height 280..........................78
Figure 10-9 Rolling-contact bearing bush non-drive end with regreasing.......................................................79
Figure 10-10 Terminal box ................................................................................................................................80
Figure 10-11 Speed encoder (shaft heights 180 and 225)................................................................................81
Figure 10-12 Speed encoder (shaft height 280) ...............................................................................................82
A5E02605207A AA
Siemens AG Operating Instructions V1.0 1PH8
Table of contents
7