Qualified Personnel; Safe Handling - Siemens 1PH818 Operating Instructions Manual

Safety notes

2.2 Qualified personnel

4. Ground and short-circuit
5. Cover or enclose adjacent components that are still live.
When work has been completed, remove these measures in reverse order.
2.2 Qualified personnel
All work at the machine should be carried out by qualified personnel only. For the purpose of
this documentation, qualified personnel is taken to mean people who fulfill the following
requirements:
● Through appropriate training and experience, they are able to recognize and avoid risks
● They have been instructed to carry out work on the machine by the appropriate person
2.3

Safe handling

Workplace safety depends on the attentiveness, care, and common sense of the personnel
who install, operate, and maintain the machine. In addition to the safety measures cited, as a
matter of principle, the use of caution is necessary when you are near the machine. Always
pay attention to your safety.
Also observe the following to prevent accidents:
● General safety regulations applicable in the country where the machine is deployed.
● Manufacturer-specific and application-specific regulations
● Special agreements made with operator
● Separate safety instructions supplied with the machine
Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the covers are
removed or if the machine is not handled, operated, or maintained properly.
 Always observe the "five safety rules (Page 11)" when carrying out any work on the
 Only remove the covers using the methods described by these operating instructions.
 Operate the machine properly.
 Perform regular maintenance on the machine.
12
and potential dangers in their particular field of activity.
responsible.
WARNING
machine.
Siemens AG Operating Instructions V1.0 1PH8
A5E02605207A AA