Siemens 1PH818 Operating Instructions Manual page 24

Preparations for use
4.2 Transport and storage
Always transport and lift the motor on the lifting eyebolts
If you lift the motor by the cooling water pipe system, the pipes will be damaged and the
motor might be dropped. Death, serious injury, or material damage to the motor - even a
write-off - can result.
 Do not attach the motor at the cooling water pipes when you have removed the bearing
 There are two lifting eyebolts for horizontal transport of the motor. In addition there are
 Only lift the motor at the lifting eyebolts on the bearing end shields. To hoist the motor,
 Pay attention to the lifting capacity of the hoisting gear. The weight of the motor is
22
WARNING
end shields. The bearing end shields must always be mounted when you transport the
motor.
two threads for vertical lifting with the shaft end pointing downwards. For this, the lifting
eyebolts and the threaded plugs have to be swapped around.
in particular if there are built-on assemblies, use suitable cable-guidance or spreading
equipment.
specified on the rating plate (Page 17).
Siemens AG Operating Instructions V1.0 1PH8
A5E02605207A AA