Table of Contents
Advertisement
Configuration Utility
Introduction
Using IMAQconf
© National Instruments Corporation
This chapter describes the basic functions of
configuration and diagnostic utility included with the PCI-1408.
performs the following functions:
IMAQconf
•
Configures the video parameters, which are automatically loaded
when the saved interface is loaded in NI-IMAQ.
•
Displays a histograph, which acts as an aid to configuring your
device.
•
Displays various look-up tables that let you implement small image
processing functions in the hardware.
•
Performs snap and continuous video acquisition for diagnostics and
verification.
•
Creates new camera files for non-standard cameras.
•
Saves acquired images to a
To configure your IMAQ device, make sure the device is properly
installed (see Chapter 2, Configuration and Installation) and then run
the
configuration utility.
IMAQconf
folder.
NI-IMAQ
The following sections describe each menu bar selection and each panel
in the utility.
format.
pict
IMAQconf
5-1
Chapter
5
, the
IMAQconf
is located in the
PCI-1408/NI-IMAQ for Mac OS
Advertisement
Table of Contents
