Configuration And Installation; What You Need To Get Started - National Instruments IMAQ PCI-1408 User Manual

Configuration and Installation

What You Need to Get Started

© National Instruments Corporation
This chapter lists what you need to get started acquiring images with your
IMAQ device; describes optional equipment and custom cables; and
explains how to unpack, configure, and install your IMAQ device.
To set up and use your 1408 device, you will need the following:
One of the following 1408 devices:
– PCI-1408
– PXI-1408
Getting Started with Your IMAQ System
NI-IMAQ release notes
IMAQ PCI/PXI-1408 User Manual
NI-IMAQ for Windows 2000/NT/9x and online documentation
Optional software packages and documentation:
– IMAQ Vision for G, LabWindows/CVI, or ComponentWorks
– IMAQ Vision Builder
– LabVIEW
– BridgeVIEW
– LabWindows/CVI
IMAQ BNC-1 shielded, 75 Ω BNC cable for VIDEO0 (included with
the 1408 device)
IMAQ A2504 video cable (optional—for trigger and additional
camera support)
IMAQ A2514 video cable (optional—for complete trigger, additional
camera, and external synchronization support)
2-1
2
IMAQ PCI/PXI-1408 User Manual