Scan For Satellites - KING One Pro KOP4800 Owner's Manual

!
IF YOU MOVE THE ANTENNA ANY TIME DURING OR AFTER THE SCAN,
When scan is complete and both satellites are found, the LED will turn steady green.
Both satellites found
(If you do not get steady green, see chart on opposite page.)
BOTH SATELLITES FOUND: go to page 12 and run the check switch.
NO SATELLITES FOUND: run another scan (press button).
ONE SATELLITE FOUND: you can still run the check switch on page 12,
but you will have fewer available channels when it is complete.
You can also run another scan (press button once to turn LED yellow, and
press a second time to start a new scan).
Many times lack of satellite acquisition is due to
obstructions. Try moving the antenna to have a better
view of the southern sky before starting a new scan.
Page 10

SCAN FOR SATELLITES

TO THE SATELLITES IN THE SOUTHERN SKY AT ANY TIME!
YOU WILL HAVE TO REPEAT THE SCAN.
pattern repeats...