Fujitsu PSWITCH 2048T User Manual page 36

FUJITSU PSWITCH
Supported tag elements and values:
Tag Element
filter
show-command Contains the CLI show command
config-text
<edit-conifg>
Usage :
<rpc message-id="201" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get-config>
<target >
<running/>
</target>
<default-operation>merge</default-operation>
<error-option>continue-on-error</error-option>
<config-text>ip telnet server enable
</config-text>
<edit-config>
</rpc>
Response from the switch:
<rpc-reply message-id="201" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
Usage :
<rpc message-id="201" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target >
<running/>
</target>
<default-operation>merge</default-operation>
<error-option>continue-on-error</error-option>
<config-text>ip telnet server enable
snmp-server port 0
netconf maxsessions 20
hostname abc
</config-text>
<edit-config>
</rpc>
36
Description
The filter type.
and the command must be valid
and complete.
supports only one command to
display information.
This tag element cannot be used
with other tag elements, and it
should be used above.
Configuration in CLI format.
Value
subtree
Now switch
User's Guide
December/2018